All contributions properly presented at the conference are eligible for publication in the conference proceedings at the JACoW website.

All contributions to the proceedings must be uploaded via IPAC/JACoW Author Accounts.

The deadline for the upload of contributions to the proceedings is:

Wednesday, May 4, 2016 at midnight Korean Standard Time [GMT +09:00]

The submission deadline is ahead of the conference so that the JACoW technical editors can process the papers in Busan, beginning promptly on Thursday, May 5. In this way any problems can be analyzed and discussed with authors upon their arrival at the conference, prior to moving on to a quality check of all successfully processed papers. The aim is to publish all contributions in a preliminary “pre-press” version at the conclusion of the conference, and at the site soon afterwards.

The successful processing of all contributions during the conference relies heavily on the collaboration of all authors. Since the JACoW editorial team is only available during the conference, any delay in receiving contributions will cause a delay in processing them, and will ultimately jeopardize swift publication on JACoW.

Submit only papers that are final and ready for publication. “Place holders” or “preliminary” versions waste the time of the editors and jeopardize early publication. The Editorial Board reserves the right to reject such submissions.

Authors are advised to download the appropriate JACoW template (the index on the left under Templates provides templates for MS Word, LaTeX and OpenDocument) and follow the instructions contained in the template. The templates contain styles which, when applied, will automatically ensure correct typesetting and layout. In MS Word use the JACoW Styles and Macros pull-down from the toolbar.

Submission of Electronic Files

What to Submit

back to top

Once the contribution has been prepared using the JACoW template and according to the IPAC’16 Paper Preparation Guidelines, the author should submit all of the following files:

  • A properly formatted MS Word, OpenOffice/LibreOffice, or LaTeX document;
  • A PDF file made from this document. If you do not have the possibility to generate a PDF file, submit a PostScript file made from that document;
  • Each original illustration in its native format as used in the document.

For Oral Presentation:

  • PDF, PowerPoint or OpenOffice/LibreOffice of slides for the oral presentation (and associated video or animation files where appropriate in their native format)

Why Do We Not Allow Authors to Submit PDF Files Only

Most authors can generate PDF files, however the standard is far from uniform and often they are not acceptable for the JACoW database because:

  • the compression settings are wrong;
  • fonts are not embedded;
  • they do not conform to the standard input required by the JACoW scripting procedures to create the final publication set;
  • most importantly, they are not PDF/A-compliant

Note that PDF files produced according to the JACoW recipe will resolve the problems listed above. We have now prepared a workflow that enables us to process and convert author PDF files to JACoW acceptable ones.

What Files Should Be Provided?

back to top

Only files named according to the paper’s program code can be uploaded via the system. ALL files used to produce the contribution must be uploaded, for example, for paper MOXAA01, file names should be:

  • MOXAA01.pdf - the PDF file. Or if no PDF file can be provided
  • - the PostScript file (rename .prn files to .ps beforehand, where necessary)

Source files:

  • MOXAA01.doc - (or .docx) the WORD source file, or
  • MOXAA01.tex - the LaTeX source file, if LaTeX was used, or
  • MOXAA01.odt - the or LibreOffice source file, if used

Figure files:

  • MOXAA01f1.eps - EPS file containing figure 1 (uploaded as “Other Supporting File”)
  • MOXAA01f2.tif - (or .jpg, .png, .gif) TIFF (or jpg, png, gif) file containing figure 2 (uploaded as “Other Supporting File”)

Oral Presentations:

  • MOXAA01_talk.pdf and/or
  • MOXAA01_talk.ppt and/or
  • MOXAA01_talk.odp - the file to be used for the oral presentation (uploaded as “Transparencies”, movies as “Talk movies”)

How Do You Produce a JACoW Accept-able PDF File?


back to top

You may generate your PDF file using the new jacow.cls class file from with pdfLaTeX, XeLaTeX or LuaLaTeX. If you are using the US letter format, the following command can be used:

  • \documentclass[letterpaper]{jacow} or
  • \documentclass[acus]{jacow}

Additional help is available on the JACoW web site in the left sidebar under ‘For authors → Information and help’. For papers with A4 format the source should start with the following lines

  • \documentclass[a4paper]{jacow} or
  • \documentclass[aca4]{jacow}

For LaTeX PDF generation the following commands are recommended:

  • pdflatex FILENAME.tex (or xelatex/lualatex)
  • pdflatex FILENAME.tex (run twice to sync internal references)

Microsoft Word for Windows 2010

back to top

Word 2010 allows you to produce a PDF file by using File → Save As → Save as type: PDF. Please make sure that the PDF file options (click “Options…”) are set as indicated in the picture before saving the PDF (this has to be done each time the file is saved as a PDF file):

Microsoft Word for Windows PDF Options

There is a second set of parameters that should be set (accessible via “Tools → Save Options…”).

Microsoft Word for Windows Save Options

This influences the font embedding in the source file. This eases the work for the editors when problems with unrecognized symbols occur with PS/PDF files and the source file has to be used.

Please tick the marked boxes as shown in the picture:

Microsoft Word for Windows Embed Fonts

The set of JACoW templates ensures a unique formatting on paper formats used in countries with US letter and A4 sized paper. There is one parameter in Word that should be unchecked, as it can conflict with the template setting. Use the following figure as a reference:

Microsoft Word for Windows Print Options

Previous Versions of Word for Windows

back to top

Pre-2010 versions of Microsoft Word do not have the capability to “Save As” a PDF file. It is common to use a virtual printer driver that creates an electronic PDF file, rather than printing to an actual printer. There are several similar tools available, both for free or paid. We do not suggest any particular one. Please check that such PDFs do satisfy the JACoW formatting requirements and that the overall quality of the generated file is satisfactory to the authors. Remember to always check that the file prints correctly.

Microsoft Word for Mac 2008-2011

back to top

Word 2008 on Macs allows you to produce a PDF file by using File → Print… → Save as PDF, or by typing Command-P. JACoW template fonts (such as Times New Roman) are automatically embedded in the PDF in Mac OS X:

Microsoft Word for Macintosh Save as PDF

Note that Word 2011 on Macs does not embed fonts properly in the output PDF when OpenType extensions are used, resulting in extremely large PDF output. OpenType extensions should be disabled under Preferences / Compatibility / Disable OpenType Font Formatting Features; this is done for you if you use the JACoW Mac templates. Please check the size of your PDF before uploading to the IPAC’16 SPMS - it should be less than 1.5 Mb.


back to top

You can generate your PDF file using the “Export as PDF” function of OpenOffice Writer accessible via the “File” option (below, left). Before clicking the “Export” button make sure that the PDF options for “Images” and “General” are set as shown below (right).

Open Office PDF Options

Submitting Your Files

back to top

Once all files are ready for upload, login to your IPAC Author Account and

  • Ensure that the paper title and co-authors on the paper are identical to the paper title and co-authors entered into the SPMS. If this is not the case, click on the links “edit” or “authors” and update. SPMS data will be used for the production of the table of contents and author index of the proceedings. Failure to enter all co-authors means they will be omitted from the author index.
  • Click on the file Upload link. Then:
    • submit the PDF file
    • submit all of the source files (text and figures) needed to make the paper (be aware that large files may take some time to transfer).

Papers will undergo processing by the technical editors directly following deadline for submission, Wednesday, May 4, 2016, and authors will be able to check the status of their paper(s) by logging into their IPAC Author Account. E-mail notifications of the processing status will also be triggered to primary (submitting) authors as processing is completed.